Manfrotto 190X3 Three Section Tripod with MHXPRO-2W Fluid Head

Manfrotto 190X3 Three Section Tripod with MHXPRO-2W Fluid Head

The Manfrotto 190X3 Three Section Tripod with MHXPRO-2W Fluid Head is suitable for still photographers, video shooters, and even birdwatchers. In fact, anyone who wants professional features in a small package will appreciate this setup.

The included head supports over eight pounds of camera and accessories. It also features two fluid drag settings to smooth your tilts. As a result, you can tilt from straight down to almost straight up in one continuous move. Meanwhile, the quick release camera plate lets you pull your camera off the head fast, whenever you need to move quickly.

Two tilt drag settings let you adjust the head to match the needs of your shot. In addition, the fixed pan setting provides resistance for slow, smooth pans.

The aluminum legs feature a 10-inch triangular-shaped center column. This adds height while maintaining torsional stability. Furthermore, the spreaderless design and independent leg height adjustment let you use the legs on uneven surfaces. So, you avoid the wobble that ground-level spreaders can cause.

Finally, four preset locking positions let you lower the legs to approximately 7.5 inches high. With the optional ground level adapter, you can position them nearly all the way to the ground.

Head

The fixed pan drag and two tilt drag settings let you fine-tune the head. Therefore, you get smooth moves when using optional cameras and accessories that weigh less than 11 pounds.

Dual panhandle rosettes let you mount the included panhandle on either side of the fluid head. This gives you the flexibility to shoot left- or right-handed.

The included quick release plate mounts easily onto the head. Its quick release mechanism also features a safety release, which helps keep your gear secure.

Legs

Quick Power Lock leg clamps allow single-hand operation. At the same time, they securely lock the legs in place to prevent slipping.

Manfrotto’s Easy Link port is a 3/8″-16 threaded hole built into the top casting. As a result, you can easily attach optional accessories directly to your legs.